Technology
for the baking industry
New

MAC PAN CLA Series Rack Proofing Chambers

Rack proofing chambers for bakeries and patisseries Models CLA124 CLA224 CLA244 CLA125 CLA225 CLA245 CLA126 CLA226 CLA246

Full description
To order

Product description

Professional MAC.PAN CLA proofing chambers create an environment for dough proofing before baking. A heating and humidification unit with a fan distributes warm, humid air inside the chamber. The rack-based layout allows an entire production batch to be handled without transferring individual trays when loading the chamber.

Technical specification

No parameters specified.

How the proofing chamber works

Racks loaded with prepared products are wheeled into the chamber and the doors are closed. The operator selects the settings to suit the type of dough and production process. The heating unit warms the air, the humidification system supplies moisture, and the fan helps distribute the air for even proofing throughout the chamber.

Temperature affects fermentation. Humidity helps prevent the dough surface from drying out, while air circulation contributes to consistent conditions throughout the chamber. Proofing time must be adjusted to the recipe, dough temperature, product size and chamber loading.

Construction and versions

In an older catalogue, the manufacturer describes a stainless steel support structure and double metal cladding with an insulating layer. Versions with or without a base are listed. Heat and humidity are supplied by a unit with a fan and heating elements. Models differ in their number of doors, capacity and footprint.

Benefits for daily operation

  • More even proofing conditions
    Distribution of heat and moisture helps reduce differences between locations within the chamber and supports consistent proofing of the entire batch.
  • Less drying of the dough surface
    Humidification helps protect product surfaces from drying out during proofing. The appropriate humidity depends on the product range.
  • Easier repetition of the production process
    A maintained environment makes it easier to prepare successive batches of the same product and reduces the dependence of proofing on changing bakery conditions.
  • Convenient rack loading
    Products remain on racks, simplifying movement between workstations. Direct transfer to the oven depends on the compatibility of the racks used.
  • Capacity to match production volume
    Selected models accommodate two or four racks. Single-door and double-door versions offer different layout options for your premises.
  • Insulated chamber
    The insulating layer helps separate the proofing space from the surrounding environment and reduce heat transfer through the walls.

Use in the bakery

The chamber is designed for doughs and products whose production process includes proofing in a warm, humid environment. Before loading the next batch, check the settings, product arrangement and required proofing time. Results also depend on the recipe and the preceding dough processing steps.

Technical specifications

The table lists the original CLA models without the INOX suffix, as specified in the manufacturer’s 2016–2017 catalogue. Dimensions are listed as width × depth × chamber height H1. Power input is taken from the catalogue column labelled consumption.

Model

Format
cm

Racks
pcs

Doors
pcs

Power input
kW

Dimensions W × D × H1
mm

CLA124

40x60
45x65

2

1

3.5

800 × 1650 × 2250

CLA224

40x60
45x65

2

2

3.5

1540 × 970 × 2250

CLA244

40x60
45x65

4

2

4.5

1540 × 1650 × 2250

CLA125

50x70

2

1

3.6

840 × 1850 × 2250

CLA225

50x70

2

2

3.6

1540 × 1060 × 2250

CLA245

50x70

4

2

4.6

1540 × 1850 × 2250

CLA126

60x80

2

1

4.5

940 × 1970 × 2250

CLA226

60x80

2

2

4.5

1800 × 1130 × 2250

CLA246

60x80

4

2

5.5

1800 × 1970 × 2250

Overall height H2, including the motor unit, is 2500 mm for all models listed.

Choosing the right model

CLA124, CLA125 and CLA126 have one door and accommodate two racks. CLA224, CLA225 and CLA226 have two doors and accommodate two racks. CLA244, CLA245 and CLA246 have two doors and accommodate four racks.

Models ending in 4 correspond to the 40 × 60 cm format; the older catalogue also lists 45 × 65 cm. Models ending in 5 are designed for the 50 × 70 cm format, and those ending in 6 for 60 × 80 cm. The catalogue format does not replace checking the actual external dimensions of the rack and the door opening.

Hynek Bílek
Hynek Bílek
Dealer

Tesoro Technic s.r.o.

Lidická 700/19, 60200 Brno

Billing details

Lidická 700/19, 60200 Brno
Company ID: 04166566, VAT ID: 04166566

Contact the dealer